Home >
Specialty Molding Router Bit
| Item | Price | |
| 91914 | Specialty Molding Bit 2" Diameter X 1" High x 1/2" Shank | $69.99 |
 |  | ||||||||||||
| ROUTER BIT DIMENSIONS | |||||||||||||
 Two flutes, Ball bearing guide. Bearing 1/2" | |||||||||||||
| |||||||||||||
| |||||||||||||
 | |||||||||||||
Get a great deal on these superior bits!
If you are not 100% satisfied with these bits, send them back for a refund.
These larger bits are designed to be used in a router table.Router Bit Set-Up Jigs - Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit.
| Router Safety Tips: It's easy to prevent mishaps if you take a few simple precautions. 1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations. |
Home >
All brands and product names are trademarked or registered trademarks of their respective companies. Prices, specifications, and availability are subject to change without notification. E.&O.E. Image & Description provided by and used with permission from
